TruSwing

Before You Begin

  • For the best experience, charge your TruSwingTM device completely by connecting the charging cable to your device and plugging it into your computer’s USB port.

1

Power On

Power on your device by holding down the device key for one second.

2

Attach Device

Position the sensor on the shaft of your club below the grip, aligning the guide line parallel to the grooves on the club face. Then close the clamp around the club.

3

Download and Install

On your smartphone, download and install the latest version of Garmin Connect Mobile.

4

Add Device

Open Garmin Connect Mobile to add your device and complete the setup process. If this is the first device you have paired with the Garmin Connect Mobile app, follow the on-screen instructions. If you have already paired another device with the Garmin Connect Mobile app, add your device by following the steps below.

iOS: On the tab bar at the bottom of the screen, select   > Garmin Devices > and follow the on-screen instructions.

Android: At the top of the screen, select   > Garmin Devices > and follow the on-screen instructions.

Before You Begin

  • For the best experience, charge your TruSwingTM device completely by connecting the charging cable to your device and plugging it into your computer’s USB port.

1

Power On

Power on your device by holding down the device key for one second.

2

Attach Device

Position the sensor on the shaft of your club below the grip, aligning the guide line parallel to the grooves on the club face. Then close the clamp around the club.

3

Pair

Power on your compatible Garmin golf watch, then select   > TruSwing to complete the setup process.

Before You Begin

  • For the best experience, charge your TruSwingTM device completely by connecting the charging cable to your device and plugging it into your computer’s USB port.

1

Power On

Power on your device by holding down the device key for one second.

2

Attach Device

Position the sensor on the shaft of your club below the grip, aligning the guide line parallel to the grooves on the club face. Then close the clamp around the club.

3

Pair

Power on your compatible Garmin golf handheld, then select Setup > TruSwing to complete the setup process.

Frequently Asked Questions

How tightly does TruSwing need to be attached?

Tighten just enough to secure the device so it doesn’t move when you swing the club. Overtightening could damage the clamp.

Can I have TruSwing and my Garmin golf device connected to Garmin Connect MobileTM simultaneously?

Yes, you can have TruSwing and one other Garmin golf device connected to Garmin Connect Mobile at the same time.

Can I add TruSwing to Garmin Connect Mobile while TruSwing is connected with a Garmin golf device?

No, you must exit out of the TruSwing section on the golf device before adding the TruSwing device to your Garmin Connect Mobile account.

What do the LEDs indicate?

LED ActivityStatus
Flashing red (for 5 seconds after turning on)The battery is low.
Flashing red (connected to a power source)The device is charging.
Solid red (after swinging)A swing was recorded.
Solid red (connected to a power source)Charging is complete.
Alternating red and blueThe device is in pairing mode.
Solid red and blueA software update is in progress.
Flashing blueThe device is paired with a compatible mobile device.

Will TruSwing record data on my practice swings?

You must make contact with a ball when swinging to record useful swing analysis data.

Manuals